Cable Pulling Winch & Related Equipments

Product Details:

We are manufacturing Cable Pulling Winches which are majorly used in cable pulling Industry for pulling of heavy duty cables underground. These machines can even be used to pull ASAR conductors on poles. We are offering winches which can work in tough environment meeting all the user needs. The unit needs electrical power to run hydro pump to ensure a step less speed control, thus avoiding any jerks while functioning of cable pulling The wire rope which needs for pay in or pay out to pull the cable is taken from a rope holding drum which keeps the total wire rope wound on it and offers the same to double capstan turret whenever it is needed. An auxiliary hydro motor fixed to the rope drum winds and un-winds the drum. The unit is provided with a wire rope directing mechanism which helps in proper laying of the wire rope on drum. The unit is fixed with a control panel in which a HMI and a PLC for programming to supply the needed data similar to set load; speed into the system is established. Further, it has exceptional attribute such as over load cut off and over speed cut off which are activated by load cell and speed sensors. This also shows the whole length of the cable pulled. The total control panel is operated by a 110 volts AC power.

 

Features

· Canopy to protect the unit.

· Rope guide mechanism for appropriate     laying of wire rope.

· Controller using hydraulics, thus ensuring    smooth functioning and step less motion.

· The load & speed of cable can be set and   the unit will mechanically trip if the limit   exceeds the set value.

· Mounted on wheels and can be towed   anywhere with the aid of a prime mover

· The speed of pulling is very high     throughout  pay in and almost double   during  pay out, thereby making sure of   speeding up the work

· Equipped with a printer to print the data   needed wrt. load, speed and pulled cable   length

· Incessantly displays the max. speed, max     load and pulled cable length on the HMI

· Perfect machine for electrical cable pulling     integrating all the needed safety features

· Electrically Powered  

Product Details:

Cable Drum Trailers have been developed and manufactured by Aacess Equipments, Hyderabad, primarily to be used for transportation of cable drums from yards to the work site. The drum trailer has a built in hydraulic lifting unit which will load the drum on the trailer unit and after locking the loaded drum, the trailer can transport the drum from the yard to the work site and keeping the drum on the trailer itself the cable pulling can be done, thereby eliminating the usage of drum lifting jacks.

Product Details:

We are offering our clients with a comprehensive range of Cable Drum Lifting Jacks. These offered clamps are manufactured by making use of quality-tested iron and other basic material coupled with latest technology, in complete adherence with the prevailing parameters of the industry. Along with this, owing into their below cited attributes, these offered clamps are widely used for developing sturdy railway tracks.

 

Features:

 

• Robust construction
• Dimensional accuracy
• Resistance against corrosion
• Fine-finish

Product Details:

We are manufacturing Cable Pulling Winches which are majorly used in cable pulling Industry for pulling of heavy duty cables underground. These machines can even be used to pull ASAR conductors on poles. We are offering winches which can work in tough environment meeting all the user needs. The Product is powered by an internal combustion engine feeding the hydro pump to ensure a step less speed control, thus avoiding any jerks while functioning of cable pulling The wire rope which needs for pay in or pay out to pull the cable is taken from a rope holding drum which keeps the total wire rope wound on it and offers the same to double capstan turret whenever it is needed. An auxiliary hydro motor fixed to the rope drum winds and un-winds the drum. The unit is provided with a wire rope directing mechanism which helps in proper laying of the wire rope on drum. The unit is fixed with a control panel in which a HMI and a PLC for programming to supply the needed data similar to set load; speed into the system is established. Further, it has exceptional attribute such as over load cut off and over speed cut off which are activated by load cell and speed sensors. This also shows the whole length of the cable pulled. The total control panel is operated by a 12 volts battery and charged with the help of the alternator run by the engine.

 

Features

· Canopy to protect the unit.

· Rope guide mechanism for appropriate laying of wire rope.

· Controller using hydraulics, thus ensuring smooth functioning and step less motion.

· The load & speed of cable can be set and the unit will       mechanically trip if the limit exceeds the set value.

· Mounted on wheels and can be towed anywhere with the aid of   a prime mover

· The speed of pulling is very high throughout pay in and almost   double during pay out, thereby making sure of speeding up the   work

· Equipped with a printer to print the data needed wrt. load,     speed and pulled cable length

· Incessantly displays the max. speed, max load and pulled cable    length on the HMI

· Perfect machine for electrical cable pulling integrating all the       needed safety features

· Self Powered - the unit functions on a diesel engine

 

 

It is hydralically operated to be primarly used for a underground cable  pulling,the unit has a pulling capability of 50KN and is designated to a pull length of 1250 mts.It is powered by a turbo charged diesel engine.