Cable Laying Machine

Aacess Cable Pusher is the Ideal Solution for providing mid assisting support between winch and the reel for bushing of underground cables in narrow ducts and open trenches. The Unit is electrical driven and comprises of a profiled drive system that consists of a pair of special split type segmented rubber transmission belts with steel plate reinforcement that guides the cable and pushes it further ahead. These two transmission belts are extremely elastic making it wear resistant, tough with a high constant of friction.

The gap between the transmission belts is adjustable from Diameter 60 – 160 according to the cable being pulled. Owing to its compact size and design, Aacess Cable Pusher can be accommodated in smaller trenches ad pits thus avoiding premature cable cutting and unwanted bends.

                                  Aacess Cable Pusher can be synched with more cable pushers in parallel while being operated by the Parent Aacess Cable Winch with additional advantage of speed synchronization.

TECHNICAL SPECIFICATIONS

 Type of Unit: Electrically Operated Cable Pusher

 Model No: ACP - 3000

 Pushing Capacity of the Unit : Up to a Cable Wt. of 3 kN

 Type of Service : Outdoor

 Mode of Operation : Wire Pendent Operated & Radio Remote Controlled

 Ambient Temp. Considered : 50 Deg C

 Enclosure for the Unit : Total Sheet Metal Enclosure

 Outer Dimensions of the Unit : 1200 mm (L) x 600 mm (W) x 600 mm (H) Equipment Specifications

 Type of Unit Proposed : Up to a Cable Wt. of 3 kN

 Type of Prime Mover : Electrically Operated

 Type of Gear Box Used : Worm Gear Box Totally Enclosed type

 Type of Belt Used for Transmission : Special Split Type Segmented Rubber Transmission Belt with Steel Plate Reinforcement.

 Max Dia of the Cable Accommodated: 160 mm

 Min Dia of the Cable Accommodated: 60 mm

 Max. Cable Pushing Speed : 25 mts /min

 Synchronization of Cable Pusher Unit : Provided With the Cable Pulling Winch

 Synchronization of Cable Pusher Unit : Provided With the Second Cable Pusher Winch

 Make of Electrical Geared Motor : Transtech

 Make of VVVF Drive : INVT/FUJI

 Make of PLC Unit : Horner, USA

 Capacity of the Diesel Generating Set : 5 KVA

 Wt. of the Unit : 270 kgs

 Wt. of the Control Panel : 18 kgs

 Details of Control Panel : Control Panel is provided with a VVVF Drive and a PLC Unit for Synchronization and a detachable pendent With a handle for carrying the panel.

??? Structure Used : Fabricated Type using M S Sections

??? Material used for Fabrication : Mild Steel Conforming to I S 2062